U210A-62 Temperature Sensor - Signal compare failure: Action
- Refer to the relevant section of the workshop manual and check the rear differential oil quantity and specification. Rectify as required, clear DTC and retest
- Check the integrity of the connectors and wiring on both the rear differential locking motor internal temperature sensor circuit and the rear differential oil temperature sensor circuit. Repair circuit(s) as required. Clear DTC and retest
- If fault persists, allow vehicle to cool for at least 1 hours then read and compare temperature values from rear differential locking motor internal temperature sensor and the rear differential oil temperature sensor using the manufacturer approved diagnostic system (the temperature difference should be less than 25°C). If the reported temperature difference is greater than 25°C, check and install a new rear differential oil temperature sensor and/or a new rear differential locking motor as required