LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2009 >> XKR 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Electronic Engine Controls (4.2L, Vehicles With: Supercharger) >> Engine Control Module (ECM) - Removal and Installation >> Removal

Engine Control Module (ECM) - Removal and Installation: Removal

  1. Remove the cover and disconnect the battery ground cable. Refer to Specifications article.
    GJ0008902Courtesy of JAGUAR CARS, INC.
  2. Remove the air intake cover.
    • Remove the 4 clips.
  3. Release the power distribution box and position aside.
    • Remove the 2 Torx bolts.
    GJ0008957Courtesy of JAGUAR CARS, INC.
  4. Disconnect the engine harness electrical connector.
    • Loosen the bolt.
    GJ0008958Courtesy of JAGUAR CARS, INC.
  5. Release the electrical connector.
    • Remove the 2 Torx screws.
    • Carefully tie the harness aside.
    GJ0008959Courtesy of JAGUAR CARS, INC.
    6. NOTE: RH illustration shown, LH is similar
  6. Remove the engine control module (ECM).
    • Remove the 3 bolts.
    • Release and disconnect the 2 engine harness electrical connectors.
scientia non olet · About LEMON Manuals