LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2009 >> XKR 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Electronic Engine Controls (4.2L, Vehicles With: Supercharger) >> Engine Control Module (ECM) - Removal and Installation >> Installation

Engine Control Module (ECM) - Removal and Installation: Installation

  1. Install the ECM.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    • Connect the ECM electrical connectors.
  2. Install the electrical connector.
    • Tighten the Torx screws.
  3. Connect and secure the electrical connector.
    • Tighten the center bolt.
  4. Position and install the power distribution box.
    • Tighten the Torx bolts to 8 Nm (6 lb.ft).
  5. Install the air intake cover.
    • Carefully secure the clips.
  6. Connect the battery ground cable and install the cover. Refer to Specifications article.
  7. Using WDS, configure a new ECM.
scientia non olet · About LEMON Manuals