LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2009 >> XK8 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Electronic Engine Controls (4.2L, Vehicles Without: Supercharger) >> Oil Temperature Sensor - Removal and Installation >> Installation

Oil Temperature Sensor - Removal and Installation: Installation

  1. Install the oil temperature sensor.
    • Clean the components.
    • Apply sealant of the correct specification to the sensor thread.
    • Tighten the sensor to 15 Nm (11 lb.ft).
    • Connect the electrical connector.
  2. Install the engine under shield. Refer to Radiator Splash Shield article.
  3. Connect the battery ground cable and install the cover. Refer to Specifications article.
scientia non olet · About LEMON Manuals