LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2009 >> XK8 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Multifunction Electronic Modules >> Information and Entertainment Module - Removal and Installation >> Installation

Information and Entertainment Module - Removal and Installation: Installation

  1. Install the information and entertainment module.
    • Tighten the Torx bolts to 6 Nm (4 lb.ft).
    • Connect the electrical connectors.
  2. Install the navigation system module bracket.
    • Tighten the Torx screws.
  3. Install the instrument panel center reinforcement trim panel.
    • Align the pegs and secure with the clips.
  4. Connect the battery ground cable. Refer to Specifications article.
  5. Connect WDS to the vehicle and configure a new module.
scientia non olet · About LEMON Manuals