Automatic Transmission/Transaxle (4.2L): Specifications
Lubricants, Fluids, Sealers and Adhesives
| Specifications | |
|---|---|
| High temperature grease | Molecote FB180 / Jaguar 8309 |
| Transmission fluid | Shell M1375.4 |
Capacities
| Liters | |
|---|---|
| Transmission fluid | 9.5 |
| Transmission fluid (Supercharged models) | 10.0 |
| Service fill | 6.0 |
Torque Specifications
| Item | Nm | lb-ft | lb-in |
|---|---|---|---|
| Crossmember to vehicle body - bolt | 48 | 35 | - |
| Fluid pan, gasket and filter - screw | 8 | 6 | 71 |
| Mass damper to crossmember - bolt | 10 | 7 | - |
| Output shaft flange - nut* | 60 | 44 | - |
| Selector lever to transmission - nut | 12 | 9 | - |
| Support insulator to crossmember - bolt | 25 | 18 | - |
| Support insulator to transmission - bolt | 48 | 35 | - |
| Flexplate to torque converter - screw | 55 | 41 | - |
| Torque converter housing to engine - bolt | 48 | 35 | - |
| Transmission control module (TCM) and Main control valve body - screw | 8 | 6 | 71 |
| Transmission fluid - drain plug | 8 | 6 | 71 |
| Transmission fluid - fill plug | A | - | |
| Transmission heat shield | 10 | 7 | - |
NOTE:
* New nut/bolt must be installed.
NOTE:
A = refer to the procedure for correct torque sequence.