LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2007 >> XJ8 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Seating) >> Removal and Installation >> Seat Control Switch >> Installation

Seat Control Switch: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Jaguar XJR, 2003 Jaguar XJ8, 2003 Jaguar XJ, 2002 Jaguar XJR, and 2002 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install and fully seat switchpack in seat mounting.
  2. Raise cushion pad for access to rear of switchpack and connect harness multiplug.
  3. Release cushion pad and secure cushion cover front elastic retaining straps to seat frame.
  4. Pull cushion cover over cushion pad and fully seat edge retaining strip on seat frame.
  5. Install seat in vehicle. Refer to FRONT SEAT  .
  6. Connect ground cable to battery terminal and fit battery cover. Refer to BATTERY CONNECT .
scientia non olet · About LEMON Manuals