LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2007 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Module Communications Network) >> Module Communications Network >> Central Junction Box (CJB) - Removal and Installation >> Removal

Central Junction Box (CJB) - Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover and disconnect the battery ground cable. Refer to Specifications article.
    GJ0009301Courtesy of JAGUAR CARS, INC.
    2. CAUTION: Removal of the clips is a delicate procedure, damage will occur if any force is used.
  2. Remove the passenger side footwell trim panel.
    • Remove the 3 clips.
    GJ0009304Courtesy of JAGUAR CARS, INC.
  3. Remove the cowl side trim panel.
    • Remove the Torx screw.
    • Remove the hood release lever.
    • Release the forward edge of the scuff plate trim panel.
    • Carefully release the clips.
  4. Release the CJB.
    • Release the battery positive cables.
    GJ0009470Courtesy of JAGUAR CARS, INC.
  5. Remove the CJB.
    • Disconnect the 10 electrical connectors.
    • Remove the 2 nuts.
scientia non olet · About LEMON Manuals