LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2007 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Module Communications Network) >> Module Communications Network >> Central Junction Box (CJB) - Removal and Installation >> Installation

Central Junction Box (CJB) - Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the CJB.
    • Disconnect the electrical connectors.
    • Tighten the nuts to 10 Nm (7 lb.ft).
  2. Secure the CJB.
    • Attach the battery positive cables.
    • Tighten the nut to 25 Nm (18 lb.ft).
  3. Install the cowl side trim panel.
    • Align the pegs and secure the clip.
    • Install the scuff plate trim panel.
    • Install the hood release lever and secure with the screw.
  4. Install the passenger side footwell trim panel.
    • Carefully secure the clips.
  5. Connect the battery ground cable and install the cover. Refer to Specifications article.
  6. Using WDS, configure a new CJB.
scientia non olet · About LEMON Manuals