LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2005 >> XK8 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Engine >> Oil Pressure Switch - In-Vehicle Procedures >> Installation

Oil Pressure Switch - In-Vehicle Procedures: Installation

    NOTE: Apply a small bead of sealant meeting Jaguar specification to the first three threads of the oil temperature sensor.
  1. Install the oil pressure switch.
    • Tighten to 15 Nm.
      GJ0002635Courtesy of JAGUAR CARS, INC.
  2. Connect the oil pressure switch electrical connector.
    GJ0002634Courtesy of JAGUAR CARS, INC.
  3. Install the generator lower cooling duct.
    • Tighten to 2 Nm.
      GJ0002301Courtesy of JAGUAR CARS, INC.
  4. Lower the vehicle.
  5. Check and, if necessary, top up the engine oil.
scientia non olet · About LEMON Manuals