Speed Control Deactivator Switch - Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This component also functions as the brake pedal switch.

Courtesy of JAGUAR CARS, INC.

CAUTION: Removal of the clips is a delicate procedure, damage will occur if any force is used.

Remove the driver's side footwell trim panel.
- Carefully release the 3 clips.
Courtesy of JAGUAR CARS, INC.
Release the brake switch.
- Rotate clockwise approximately 30 degrees.
- Carefully release the clip.
- Disconnect the electrical connector.