Pinpoint Test B: CHECK SPARK PLUG RESISTANCE
NOTE:
Only resisted spark plugs must be used.
- CHECK SPARK PLUG RESISTANCE
Remove the suspect spark plug(s). Refer to Pinpoint Test B: CHECK SPARK PLUG RESISTANCE .
Measure the resistance between the spark plug center electrode tip and the spark plug HT contact.
Is the resistance between 8,000 and 12,000 ohms? (nominal 10,000 ohms)
YES: Check ignition coil and circuits. See possible sources list for misfire.
NO: INSTALL a new spark plug. Refer to Pinpoint Test B: CHECK SPARK PLUG RESISTANCE . CLEAR the DTC. TEST the system for normal operation.