LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2003 >> XKR 2D Convertible >> Repair and Diagnosis (Single Page) >> Steering >> Steering Control Systems >> Steering System - General Information >> Steering System - General Information >> Power Steering System Bleeding - General Procedures

Power Steering System Bleeding - General Procedures

    NOTE: When filling the reservoir, make sure that the fluid is clean and not agitated prior to use. The fluid should be poured slowly into the reservoir to minimize the possibility of aeration.
  1. Fill the reservoir to the MAX mark.
    2. NOTE: Do not start the engine.
  2. Turn the steering from lock to lock.
  3. Check the fluid level. Fill the reservoir to the MAX mark if necessary.
  4. Start the engine and turn the steering from lock to lock.
  5. Switch the engine off.
  6. Check the fluid level. Fill the reservoir to the MAX mark if necessary.
  7. Start the engine, turn the steering wheel from lock to lock. If excessive noise is apparent or shudder is evident through the steering wheel, repeat the bleed procedure.
scientia non olet · About LEMON Manuals