Engine Front Cover - In-Vehicle Procedures: Removal

All vehicles 

1. Remove the cooling fan motor and shroud. Refer to Engine Cooling .
2. Remove the left-hand valve cover. Refer to Valve Cover LH .
3. Remove the right-hand valve cover. Refer to Valve Cover RH .
4. Remove the crankshaft front seal. Refer to Crankshaft Front Seal .

Vehicles with supercharger 

5. Remove supercharger drive belt tensioner. Refer to Accessory Drive .

   Courtesy of JAGUAR CARS, INC.

6. Disconnect the electrical connector.

   Courtesy of JAGUAR CARS, INC.

7. Detach the coolant hose.
   • Reposition the retaining clip.

   Courtesy of JAGUAR CARS, INC.

8. Detach the thermostat housing.
   • Remove the retaining bolts

   Courtesy of JAGUAR CARS, INC.

9. Remove the thermostat housing.
   • Detach the coolant hose.

   Courtesy of JAGUAR CARS, INC.

10. Remove the supercharger idler pulley and mount.
    1. Remove the retaining bolts.
    NOTE: The retaining bolt will remain captive.
    2. Remove the supercharger idler pulley and mount.

All vehicles 

11. Remove the water pump pulley.

    Courtesy of JAGUAR CARS, INC.

12. Remove the accessory drive belt idler pulley.

    Courtesy of JAGUAR CARS, INC.

13. Remove the drive belt tensioner.

    Courtesy of JAGUAR CARS, INC.

14. Remove the power steering pump upper securing bolts.

    Courtesy of JAGUAR CARS, INC.

15. Raise the vehicle.
16. Remove the power steering pump rear lower securing bolt.

    Courtesy of JAGUAR CARS, INC.

17. Lower the vehicle.
18. Detach the power steering pump.
    • Remove the power steering pump front lower securing bolt.

      Courtesy of JAGUAR CARS, INC.

19. Detach the wiring harness.

    Courtesy of JAGUAR CARS, INC.

20. Remove the power steering pump mount bracket.
    • Remove the retaining bolts.

      Courtesy of JAGUAR CARS, INC.

21. Remove the engine front cover.
    • Remove and discard the seals.

      Courtesy of JAGUAR CARS, INC.