DTC P0702: Transmission Control System Electrical

NOTE: For additional information, see Figure and/or Figure

POSSIBLE SOURCE(S):

Harness fault.
High side switch (FET) fault.
Connector pin(s) bent, loose or corroded
ACTION(S) TO TAKE:
- Go to PINPOINT TEST C or PINPOINT TEST D .

NOTE: For additional information, see Figure and/or Figure .

POSSIBLE SOURCE(S):

Harness fault.
Speed sensor voltage supply out of tolerance.
Connector pin(s) bent, loose or corroded
ACTION(S) TO TAKE:
- Go to PINPOINT TEST E .