Accelerator Pedal - Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- To install, reverse the removal procedure.
Right-hand drive vehicles
- Tighten to 9 Nm.
NOTE:
Make sure the accelerator pedal return spring is correctly located.
Left-hand drive vehicles
- Tighten to 9 Nm.
CAUTION:
Make sure damage does not occur to the floor covering.
NOTE:
Make sure the accelerator pedal return spring is correctly located.
All vehicles
- Adjust the accelerator cable. Refer to Accelerator Cable Adjustment - General Procedures .