LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2003 >> XJR >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Acceleration Control) >> Acceleration Control >> Accelerator Cable - Removal and Installation >> Removal

Accelerator Cable - Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Right-hand drive vehicles shown, left-hand drive vehicles similar.
GJ0002413Courtesy of JAGUAR CARS, INC.
  1. Remove and discard the accelerator cable retaining sleeve split pin.
    GJ0002414Courtesy of JAGUAR CARS, INC.
  2. Detach the accelerator cable.
    1. Remove the accelerator cable retaining sleeve.
    2. Detach the accelerator cable.
    GJ0002407Courtesy of JAGUAR CARS, INC.
  3. Remove the driver side bulkhead cover.
    GJ0002408Courtesy of JAGUAR CARS, INC.
  4. Open the accelerator pedal position (APP) sensor cover.
    1. Release the APP sensor cover retaining clip.
    2. Open the APP sensor cover.
    GJ0002415Courtesy of JAGUAR CARS, INC.
  5. Detach the accelerator cable.
    GJ0002416Courtesy of JAGUAR CARS, INC.
  6. Detach the accelerator inner cable.
    GJ0002417Courtesy of JAGUAR CARS, INC.
    7. NOTE: Note the accelerator cable position.
  7. Remove the accelerator cable.
scientia non olet · About LEMON Manuals