LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2003 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Engine) >> Engine >> Oil Pressure Switch - In-Vehicle Procedures >> Installation

Oil Pressure Switch - In-Vehicle Procedures: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Apply a small bead of sealant meeting Jaguar specification to the first three threads of the oil temperature sensor.
  1. Install the oil pressure switch.
    • Tighten to 15 Nm.
      GJ0002635Courtesy of JAGUAR CARS, INC.
  2. Connect the oil pressure switch electrical connector.
    GJ0002634Courtesy of JAGUAR CARS, INC.
  3. Install the generator lower cooling duct.
    • Tighten to 2 Nm.
      GJ0002301Courtesy of JAGUAR CARS, INC.
  4. Lower the vehicle.
  5. Check and, if necessary, top up the engine oil.
scientia non olet · About LEMON Manuals