LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XKR Base, 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> External Control >> Removal & Installation >> Selector Lever Switch >> Removal

Selector Lever Switch: Removal

  1. Remove battery cover and disconnect ground cable from battery terminal. Refer to BATTERY DISCONNECTION PROCEDURE .
  2. Remove the gear shift knob. See TRANSMISSION SELECTOR LEVER KNOB .
  3. Remove the console finisher veneer panel. See FLOOR CONSOLE FINISH PANEL .
  4. Remove the J-gate surround. See SELECTOR LEVER GATE FINISH PANEL .
  5. Remove the D to 4 switch.
    • Press the retaining tangs to release.
    Fig 1: Removing "D" To 4 Switch
    G00378931Courtesy of JAGUAR CARS, INC.
scientia non olet · About LEMON Manuals