LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XKR Base, 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> External Control >> Removal & Installation >> Selector Lever Gate Finish Panel >> Installation

Selector Lever Gate Finish Panel: Installation

  1. Ensuring correct orientation, fit and fully seat Sport mode and Cruise Control on/off switches in surround.
  2. Position surround for access and connect switch harness multiplugs.
  3. Position surround over "J" gate and press firmly to fully seat tangs.
  4. Remove protective tape from veneer panel.
  5. Perform the BATTERY RECONNECTION PROCEDURE .
scientia non olet · About LEMON Manuals