Door Lock Control Switch Bulb: Installation
WARNING: This page is about a different car, the 2001 Jaguar XKR and 2001 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.
- Install bulb in holder.
- Install bulb and holder in module and rotate 1/4 turn clockwise to fully seat.
- Install switch module in console ensuring that end locators are fully seated.
- Connect switch module harness multiplug.
- Install radio console. Refer to AUDIO UNIT HOUSING
- Install center console. Refer to FLOOR CONSOLE
- Install 'J' gate surround. Refer to FLOOR CONSOLE FINISH PANEL .
- Connect ground cable to battery terminal and install battery cover. Refer to BATTERY RECONNECTION PROCEDURE .