Battery Disconnect Procedure
WARNING:
Radio code saving devices must not be used when conducting work on air bag or fuel systems. It must be noted that, when using these devices, the vehicle electrical system is still live although with a reduced current flow.
CAUTION:
Always stop the engine before disconnecting the battery negative lead and make sure the battery positive lead is isolated.
NOTE:
Before disconnecting the battery make sure that the radio receiver/cassette player/mini disc player and compact disc player key codes are known and that no data is required from the ECM because battery disconnection will erase any fault codes and idle/drive values held in the Keep Alive Memory (KAM). It is not necessary to disconnect or remove electronic control modules. Radio Code Savers may be used. With the battery disconnected, a Radio Code Saver will allow sufficient current to pass to maintain the radio receiver/cassette player/mini disc player and compact disc player memory, operate the clock and supply the door operated interior lights while isolating the battery in the event of a short circuit.
Always disconnect the battery before commencing repair operations which require the vehicle to be jacked up, work on the engine, work underneath the vehicle or arc welding. Always disconnect battery negative cable first.