LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2000 >> XJR >> Repair and Diagnosis >> Body & Frame >> Seats >> Seating >> Removal and Installation >> Seat Control Switch >> Installation

Seat Control Switch: Installation

  1. Install and fully seat switch pack in seat mounting.
  2. Raise cushion pad for access to rear of switch pack and connect harness multiplug.
  3. Release cushion pad and secure cushion cover front elastic retaining straps to seat frame.
  4. Pull cushion cover over cushion pad and fully seat edge retaining strip on seat frame.
  5. Install seat in vehicle. Refer to FRONT SEAT  .
  6. Connect ground cable to battery terminal and fit battery cover. Refer to BATTERY CONNECT .
scientia non olet · About LEMON Manuals