Removal & Installation (XK8 & XKR)
CAUTION:
Before disconnecting negative battery cable, open driver's door, or both doors if necessary, to allow side windows to open. Ensure that doors remain open until after battery has been disconnected. If doors are opened or closed and windows have not opened door window seals and/or windows may be damaged.
- Disconnect negative battery cable. Remove door trim pad from door. Remove 4 door speaker bolts, disconnect speaker connector and remove speaker.
- Remove 3 door module screws. Remove module through speaker opening. Disconnect 2 module harness connectors and remove module. If necessary remove foam gasket from module and discard.
- To install, reverse removal procedure. If module gasket was removed install a NEW gasket.