LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2000 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Servicing) >> In Vehicle Repair >> Transmission Support Insulator >> Installation

Transmission Support Insulator: Installation

WARNING: This page is about a different car, the 2003 Jaguar XJR, 2002 Jaguar XJR, and 2001 Jaguar XJR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the mounting rubber assembly to position and tighten the center bolt to 30-40 Nm. See Figure.
  2. Tighten the crossmember to body bolts and the mounting rubber to crossmember bolts to 22-28 Nm.
    Fig 1: Tightening Crossmember-To-Body Bolts
    G00378412Courtesy of JAGUAR CARS, INC.
scientia non olet · About LEMON Manuals