Removal & Installation
- Remove fuel tank. See FUEL TANK
. Disconnect evaporative breather hose. See Fig 1
. Using Lock Ring Wrench (JD174), remove locking ring from evaporative flange.
- Disconnect fuel pump wiring harness connector. Using Fuel Tank Hose Clip Driver (JD175), disconnect fuel hoses from fuel pump. Remove fuel pump and pump mounting rubber from support bracket.
- Remove tie wrap from pump mounting rubber. Using a twisting motion, lift and remove fuel pump. To install, reverse removal procedure. Ensure pump is fully seated in mounting bracket inside fuel tank.
Courtesy of JAGUAR CARS, INC.