LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 1993 >> XJS 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Removal And INSTALLTION >> Throttle Position Sensor

Throttle Position Sensor

NOTE: Throttle position sensor must be adjusted and set using Jaguar Diagnostic System (JDS).
  1. Disconnect negative battery cable. Release breather and air valve hose clips at intake elbow. Detach hoses from elbow.
  2. Release clip at throttle housing and detach elbow hose. Release mass airflow meter elbow hose clip and detach hose. Remove air intake elbow. Disconnect throttle position sensor. Remove screws and throttle position sensor. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals