LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 1993 >> XJS 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Removal And INSTALLTION >> Emission System Components >> Egr Transfer Pipe

Egr Transfer Pipe

  1. Disconnect negative battery cable. Loosen transfer pipe union nuts at EGR valve and intake manifold. Raise front of vehicle, and support it using jackstands.
  2. Jack up rear of engine to access transfer pipe from below. Disconnect oxygen sensor connector from above. Remove wiring harness/oil dipstick tube bracket bolt. Position bracket and oil dipstick tube "P" clip aside.
  3. Disconnect wiring harness from starter solenoid and motor. Disconnect fuel injection wiring harness, and set it aside. Carefully remove EGR transfer pipe. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals