Neutral Safety Switch: XJS
- Disconnect negative battery cable. Remove gear selector knob. Carefully remove window switch panel from center console without disconnecting window switches.
- Remove screws securing shift control cover. Move cover enough to obtain access to cigarette lighter and door lock switch terminals. Note, mark and detach terminals. Remove cover, and detach harness from inhibitor switch. Connect battery and test light in series with switch.
- Place gear selector in Neutral, and loosen lock nuts securing switch. Adjust switch until test light illuminates. Tighten lock nuts. Ensure light stays on with gear selector lever in Park, and is off with gear selector lever in Drive.
- Remove test light, and reconnect switch harness. Reconnect cigarette lighter and door switch terminals, and install cover. Install electric window switch panel in center console. Install gear lever knob. Reconnect battery.