LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 1992 >> XJS 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - M400 >> On-Vehicle Service >> Governor Assembly

Governor Assembly

  1. Support engine/transmission assembly using rear engine lifting eye. Remove rear engine/transmission mount. Remove crossmember. Lower engine slightly.
  2. Remove governor attaching screws, cover, and gasket, being careful not to distort cover. Discard gasket. Remove governor assembly by pulling straight out of case.
scientia non olet · About LEMON Manuals