LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 1991 >> XJ6 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Potentiometer >> Removal & Installation (XJS)

Removal & Installation (XJS)

  1. Throttle potentiometer is located underneath throttle pulley. Throttle pulley is mounted to a pedestal on top center of engine. Remove both throttle rods and throttle cable from throttle pulley assembly.
  2. Remove throttle pulley retaining nuts, and lift up assembly to access potentiometer. Disconnect potentiometer wire harness connector. Remove retaining screws and throttle potentiometer. To install, reverse removal procedure. For throttle potentiometer adjustment, see THROTTLE POTENTIOMETER in the ADJUSTMENTS article in this section.
scientia non olet · About LEMON Manuals