LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC B0827 >> Circuit/System Testing

Circuit/System Testing

  1. Turn OFF the ignition for 5 seconds, then turn ON the ignition and wait at least 60 seconds.
    • If DTC B0827 does not reset, go to Diagnostic Aids
  2. Turn the ignition OFF. Disconnect the traction control switch harness connector. Turn the ignition ON and wait at least 60 seconds.
    • If DTC B0827 does not reset, replace the traction control switch.
    • If the DTC B0827 resets, check the TCS switch requested indicator control circuit for a short to ground.
  3. If the circuit test normal, replace the BCM.
scientia non olet · About LEMON Manuals