LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> Ascender LS, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Diagnostic Information & Procedures >> Transmission Control Lever Malfunction >> Component Testing

Component Testing

  1. Install a 10 A fused jumper wire from 12 volts to the automatic transmission shift lock actuator control circuit terminals B and E. Momentarily connect a jumper wire from ground to terminal A.
  2. Listen for the solenoids to turn ON and OFF.
    • If the function does not perform as specified, replace the automatic transmission shift lock actuator.
scientia non olet · About LEMON Manuals