LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.9L - Introduction (2 Of 2) >> Repair Instructions >> Heated Oxygen Sensor 2 Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of HO2S Electrical Connector
    GM1363915Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the heated oxygen sensor (HO2S) electrical connector (3) from the engine wiring harness connector (1).
    3. NOTE: Refer to Excessive Force and Oxygen Sensor Notice .
    Fig 2: View Of HO2S
    GM2046779Courtesy of GENERAL MOTORS CORP.
  3. Using the J 39194-B  , remove the HO2S from the catalytic converter. See Special Tools .
scientia non olet · About LEMON Manuals