LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Vehicle Rollover Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Vehicle Rollover Sensor
    GM1526913Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the nuts securing the rollover sensor to the floor panel.

    Tighten:  Tighten the screws to 10 N.m (88 lb in).

  2. Connect the electrical connectors.
  3. Install the rear carpet. Refer to Rear Floor Panel Carpet Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals