LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (Programming And Setup - All Systems) >> Repair Instructions >> Power Steering Control Module Programming and Setup >> Power Steering Motor or Torque Sensor Replacement

Power Steering Motor or Torque Sensor Replacement

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The power steering control module is serviced separately from the steering column assembly. However, the torque sensor is serviced as part of the steering column assembly.

After replacing either the steering column assembly or the power steering motor only the Steering Position/Torque Sensor Calibration procedure must be performed. Certain steering symptoms can be corrected by performing the Steering Position/Torque Sensor Calibration procedure such as: