LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Data Communication System) >> Repair Instructions >> Liftgate Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
    2. Fig 1: Locating Liftgate Module Electrical Connectors
    GM749979Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connectors (3) from the module as necessary.
  3. Remove the bolts that retain the module to the liftgate.
  4. Remove the module from the liftgate.
scientia non olet · About LEMON Manuals