LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Engine Control System & Fuel System - 5.3L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
    2. Fig 1: View Of Fuel Level Sensor
    GM1528400Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel level sensor electrical connector (1).
  3. Depress the fuel level sensor retaining tabs (2) to release the sensor from the sender assembly.
    4. Fig 2: Identifying Fuel Level Sensor & Electrical Connector
    GM1528402Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel level sensor electrical connector (1) and sensor (2) from the fuel sender assembly.
scientia non olet · About LEMON Manuals