LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Engine Control System & Fuel System - 5.3L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Level Sensor & Electrical Connector
    GM1528402Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor (2) and electrical connector (1) to the fuel sender assembly.
    2. Fig 2: View Of Fuel Level Sensor
    GM1528400Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel level sensor electrical connector (1).
  3. Ensure the fuel level sensor retaining tabs (2) are fully engaged.
  4. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
scientia non olet · About LEMON Manuals