LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Disconnecting Procedure

Disconnecting Procedure

CAUTION: Refer to BATTERY DISCONNECT CAUTION .
    Fig 1: View Of Battery & Cables
    GM1804767Courtesy of GENERAL MOTORS CORP.
  1. Record all preset and theft codes from the radio.
  2. Turn the ignition switch to the LOCK position.
  3. Verify that all the electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
  4. Loosen the negative battery cable bolt.
  5. Remove the negative battery cable (2) from the battery.
  6. Position the negative battery cable away from any body ground.
scientia non olet · About LEMON Manuals