LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Connecting Procedure

Connecting Procedure

    Fig 1: View Of Battery & Cables
    GM1804767Courtesy of GENERAL MOTORS CORP.
  1. Verify that all electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
  2. Clean any corrosion from the negative battery cable using a wire brush.
  3. Position the negative battery cable (2) to the battery.
    4. NOTE: Refer to Fastener Notice .
  4. Tighten negative battery cable bolt.

    Tighten:  Tighten the bolt to 15 N.m (11 lb ft).

scientia non olet · About LEMON Manuals