LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Radiator Support Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Radiator Support Shield
    GM769533Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator support shield.
    2. NOTE: Refer to Fastener Notice .
  2. Install the radiator support shield mounting nuts and bolts.

    Tighten:  Tighten the radiator support shield mounting nuts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals