LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Assist Step Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Assist Step Nuts & Fasteners
    GM750777Courtesy of GENERAL MOTORS CORP.
  1. Install the assist step pad to the assist step, ensuring that the fasteners (2) are fully seated.
  2. Position the assist step to the vehicle.
    NOTE: Refer to FASTENER NOTICE .

    Install the nuts (1) that retain the assist step to the assist step support brackets.

    Tighten:  Tighten the nuts to 25 N.m (18 lb ft).

  3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
scientia non olet · About LEMON Manuals