Installation Procedure
WARNING: This page is about a different car, the 2009 GMC Envoy and 2009 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the speaker to the I/P.
- Connect the speaker electrical connector.
- Install the 3 speaker retaining screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
CAUTION:
Refer to Fastener Caution
.