LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 277 (Mirror Systems) >> Repair Instructions >> Power Mirror Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Mirror Switch & Driver Master Switch
    GM714018Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the power folding mirror switch.
  2. Position the power folding mirror switch to the door trim panel.
  3. Apply downward pressure to the power folding mirror switch, ensuring the retaining tabs are fully seated.
scientia non olet · About LEMON Manuals