LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Video Player Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the video display assembly. Refer to Video Display Replacement (With Sunroof)  or Video Display Replacement (Without Sunroof) .
  2. Fig 1: Identifying Rear Overhead Console Carrier Screws
    GM792148Courtesy of GENERAL MOTORS CORP.
  3. Remove the two rear overhead console carrier screws (1).
  4. Fig 2: View Of Front Bracket Retaining Bolts
    GM778730Courtesy of GENERAL MOTORS CORP.
  5. Remove the front bracket retaining bolts.
  6. Fig 3: Exposing Rear Bracket Retaining Bolt
    GM792151Courtesy of GENERAL MOTORS CORP.
  7. Carefully pull down on the rearward edge of the headliner in order to expose the rear bracket retaining bolt.
  8. Remove the rear retaining bolt.
  9. Carefully remove the bracket from the vehicle through the headliner opening.