Installation Procedure
WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the microphone (2) to the overhead console.
- Install the 2 microphone retaining screws.
Tighten: Tighten the screws to 0.8 N.m (7 lb in).
- Connect the microphone electrical connector (3).
- Install the overhead console. Refer to Roof Console Replacement .
NOTE:
Refer to Fastener Notice
.