LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Front Upper Speaker Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Instrument Panel (I/P) Upper Trim Pad
    GM718025Courtesy of GENERAL MOTORS CORP.
  1. Remove the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
    2. Fig 2: View Of Speaker & Retaining Screws To Instrument Panel (IP) Substrate
    GM718026Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the speaker electrical connector does not fall into the speaker opening.
  2. Remove the 3 screws that retain the speaker to the instrument panel (I/P) substrate.
  3. Disconnect the speaker electrical connector.
  4. Remove the speaker from the I/P.
scientia non olet · About LEMON Manuals