LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Digital Radio Receiver Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock®, and "XM Theftlock®" will display.
  1. Lower the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
    2. Fig 1: View Of Electrical Connector & Receiver
    GM1237407Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector (1) from the receiver.
    3. Fig 2: View Of Antenna Electrical Connector
    GM1237408Courtesy of GENERAL MOTORS CORP.
  3. Remove the antenna electrical connector (1) from the receiver.
    4. Fig 3: Module Mounting View
    GM1236121Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts retaining the receiver to the insulator panel.
  5. Remove the receiver from the vehicle.
scientia non olet · About LEMON Manuals