LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Programming And Setup - All Systems) >> Repair Instructions >> Power Steering Control Module Programming and Setup >> Power Steering Control Module (PSCM) Replacement & Setup

Power Steering Control Module (PSCM) Replacement & Setup

WARNING: This page is about a different car, the 2007 Pontiac Torrent and 2007 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The power steering control module is serviced separately from the steering column assembly.

If the power steering control module (PSCM) is replaced, the following procedures must be performed in the following order:

  1. PSCM reprogramming. Refer to Service Programming System (SPS) .
  2. Steering Position/Torque Sensor Calibration.